Peptides and SARMS
BPC157 10 mg
Manufacturer: Stealth Labs
Pharmaceutical name: Pentadecapeptide
Pack: vial (10mg per vial)
STEALTH - Shipped without label
Shipping :
International
U.S. Domestic
Out of stock
What Is BPC157 10 mg?
BPC157 10 mg is a research peptide made by Stealth Labs. The active substance is Body Protective Compound 157, also written as BPC 157 or Pentadecapeptide. Each vial holds 10 mg of lyophilized powder. You mix the powder with bacteriostatic water before lab use.
BPC 157 is a synthetic peptide built from 15 amino acids. It stays stable in stomach acid, and it is one of the most studied peptides in repair and recovery research.
Why Researchers Buy Body Protective Compound 157
Most buyers look at BPC 157 for a few research areas:
- Tissue repair - studied in models of muscle, tendon and ligament healing.
- Gut research - tested for its effect on the stomach and intestinal lining.
- Joint and inflammation studies - used in work on swelling and joint stress.
- Recovery stacks - often studied next to other repair peptides such as TB 500 and GHK-Cu 50mg.
These are research findings only. BPC157 10 mg is sold for laboratory work, not as a medicine.
What You Get In Each BPC157 10 mg Vial
- Manufacturer: Stealth Labs
- Pharmaceutical name: Pentadecapeptide
- Pack: vial, 10 mg per vial
- Form: lyophilized powder for stability
- Shipping note: Stealth Labs products ship without a label
Stealth Labs ships both domestic and international, and the unlabeled vial keeps your parcel discreet.
How To Store And Handle BPC157 10 mg
Keep the sealed vial in a cool, dark and dry place. Heat and direct light break peptides down. Once you mix the powder, store the vial in the fridge between 2 and 8 degrees Celsius and use it within a few weeks. Do not shake the vial, roll it gently between your hands instead. Always work with clean tools.
Often Researched Together With
BPC 157 is rarely studied alone. Common pairings in the lab are TB 500 for soft tissue work and GHK-Cu 50mg for skin and collagen research. If you need a smaller dose, our BPC-157 5mg page covers the 5 mg vial. You can compare the full range on the Peptides and SARMS category page.
Common Questions About BPC157 10 mg
Is BPC157 10 mg the same as BPC 157?
Yes. BPC157, BPC 157 and Body Protective Compound 157 are three ways of writing the same peptide. Only the spelling changes, the substance does not.
Do I need a prescription?
No. You can buy BPC157 10 mg without prescription from our shop.
How discreet is the packaging?
Stealth Labs sends this vial without a label, so the parcel gives nothing away.
Buy BPC157 10 mg Online
Ordering a 10 mg vial of Body Protective Compound 157 from Stealth Labs takes a minute. Add BPC157 10 mg to your cart and check out. If you are planning a research stack, compare it with TB 500 and GHK-Cu first, or start from the Peptides and SARMS page to see every size and manufacturer we stock.
| Tier | Amount per dose | What it means |
|---|---|---|
| Dose ranges | ||
| Low | 100 mcg | Cautious starting amount |
| Moderate | 250 mcg | Amount most often used in research |
| High | 500 mcg | Top of the range typically discussed |
| Key facts | ||
| Approval status | Research peptide only; the FDA has not approved any dose for human use | |
| Half-life | Not fixed; varies between reports | |
| Usual route | Injection under the skin (subcutaneous) | |
| Frequency | Once or twice per day | |
| Highest dose studied | 500 mcg | |
| Possible side effects | Irritation at the injection spot, nausea, digestive upset | |
| Disclaimer | Figures are math conversions for reference only, not medical advice | |
| Reconstitution calculator | |
|---|---|
| Find out how much bacteriostatic water to add and how many units to draw on your syringe for your BPC-157 dose. | |
| Peptide in the vial |
mg
|
| Bacteriostatic water |
mL
|
| Dose you want |
mcg
|
| Syringe |
|
| Results | |
| Choose your values and press Calculate. | |
| Concentration | — |
| Amount to draw | — |
| Units to draw | — |
| Doses in the vial | — |
| How the math works | |
| 1. Find the concentration | Divide the peptide in the vial by the water added. For example, 5 mg ÷ 2 mL = 2.5 mg/mL, which is 2,500 mcg/mL |
| 2. Work out the volume | Divide the dose by the concentration. For example, 100 mcg ÷ 2,500 mcg/mL = 0.04 mL |
| 3. Convert to units | On a U-100 syringe, multiply the mL by 100. For example, 0.04 mL = 4 units |
| 4. Check the syringe | Make sure the amount fits the syringe you are using |
| Worked example | |
| Vial | 5 mg BPC-157 |
| Water | 2 mL bacteriostatic water |
| Dose | 100 mcg |
| Syringe | 100 units (1 mL) |
| Concentration | 5 mg ÷ 2 mL = 2,500 mcg/mL |
| Amount to draw | 100 mcg ÷ 2,500 mcg/mL = 0.04 mL, which is 4 units on a U-100 syringe |
| Disclaimer | |
| This tool does math conversions only. It does not choose a dose for you or confirm product quality, safety, or medical suitability. | |
Reconstitution & Storage
Mixing a peptide takes about a minute. Keeping it good afterwards is the part most people get wrong, so follow the guide below and then store the vial the way we describe underneath it.
How to Reconstitute
Follow the five steps in the guide above. Bring the vial and the diluent to room temperature first, add the bacteriostatic water slowly down the inside wall so it does not foam and swirl gently until the powder is fully dissolved. Never shake the vial and never spray the bacteriostatic water straight onto the powder.
How to Store the Mixed Peptide
Once it is mixed, the vial goes back in the refrigerator at 2 to 8°C (35.6°F to 46.4°F) and stays there until you have used it. Write the mixing date on the vial so the clock is visible, not remembered.
- Temperature: a normal fridge, 2 to 8°C (35.6°F to 46.4°F). Not the freezer, not a kitchen cupboard.
- Shelf life: about 4 weeks. Past 28 days, discard it.
- Light: keep it in the box or a dark drawer. Direct light degrades peptides.
- Handling: swab the stopper before each draw, use a fresh needle and never shake the vial. Swirl gently if it needs mixing.
- Freezing: do not freeze a mixed solution. Ice crystals and freeze-thaw cycles cut potency.
- Dispose if: the liquid turns cloudy, changes colour, or shows visible particles.
Unmixed powder is far easier to store. Keep it dry, out of light, at room temperature for short periods or at -20°C for the long term and reconstitute only what you plan to use.
No reviews found
Please log in to write BPC157 10 mg review.
Related Offers
Axiolabs
Manufacturer: Axiolabs
Pharmaceutical name: Pentadecapeptide
Pack: vial (5 mg)
⚠️ Provided in a lyophilized powder for stability
British Dragon Pharmaceuticals
Manufacturer: British Dragon Pharmaceuticals
Pharmaceutical name: Pentadecapeptide
Pack: vial (5 mg)
⚠️ Provided in a lyophilized powder for stability
Kalpa Pharmaceuticals LTD, India
Manufacturer: Kalpa Pharmaceuticals
Pharmaceutical name: Pentadecapeptide
Pack: vial (5mg per vial)
⚠️ Provided in a lyophilized powder for stability
Domestic & International
-40% OFF
Peptide Hubs
Manufacturer: Peptide Hubs
Pharmaceutical name: Body Protective Compound 157
Pack: vial (5 mg)
⚠️ Provided in a lyophilized powder for stability
$22.80
$38.00
Domestic & International
-40% OFF
Dragon Pharma, Europe
Manufacturer: Dragon Pharma
Pharmaceutical name: Pentadecapeptide
Pack: vial (5 mg)
⚠️ Provided in a lyophilized powder for stability
$24.00
$40.00
Domestic & International
Dragon Pharma, Europe
Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Testosterone Propionate,
Drostanolone Propionate, Trenbolone Acetate
Pack: 10 ml vial (150 mg/ml)
$72.00
Domestic & International
Dragon Pharma, Europe
Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Nandrolone Decanoate
Pack: 10 ml vial (300 mg/ml)
$66.00
Domestic & International
Buy 5+ for $62.70 and save $16.50
Dragon Pharma, Europe
Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Boldenone Undecylenate
Pack: 10 ml vial (300 mg/ml)
$66.00