British Dragon

MOTS-c 10mg

Manufacturer: British Dragon Pharmaceuticals
Pharmaceutical name: MOTS-c; Mitochondrial Peptide
Pack: vial (10 mg per vial)
⚠️ Provided in a lyophilized powder for stability

Shipping :

International

U.S. Domestic

Out of stock

Description
Dosage Chart
Reconstitution Calculator
Mixing & Storage
Reviews

What Is MOTS-c 10mg?

MOTS-c 10mg is a research peptide from British Dragon Pharmaceuticals. Its active substance is MOTS-c, also listed as Mitochondrial Peptide. Every vial holds 10 mg of lyophilized powder, which you mix with bacteriostatic water before lab work.

Most peptides come from the pituitary or the gut. MOTS-c is different, it comes from the mitochondria, the part of the cell that makes energy. That is why metabolic labs took an interest in it.

Why Researchers Buy MOTS-c 10mg

Lab work with MOTS-c usually covers:

Insulin sensitivity - studied for how cells respond to insulin.
Metabolic regulation - examined in models of energy balance.
Exercise capacity - tested for endurance and muscle fuel use.
Fat oxidation - looked at for how the body burns fat for fuel.
Ageing research - studied because MOTS-c levels fall with age.

All of this is laboratory research. MOTS-c 10mg is not a medicine and is not sold for human use.

What You Get In Each MOTS-c 10mg Vial

Manufacturer: British Dragon Pharmaceuticals
Pharmaceutical name: MOTS-c; Mitochondrial Peptide
Pack: vial, 10 mg per vial
Form: lyophilized powder for stability

How To Store MOTS-c 10mg

Keep the sealed vial cool, dark and dry. After mixing, store it in a fridge between 2 and 8 degrees Celsius and use it within a few weeks. Do not shake the vial, roll it gently between your hands to mix, and keep your tools clean.

Often Researched Together With

MOTS-c is often run beside other mitochondrial and metabolic peptides. Labs may compare it with MOTS-C 10mg by Dragon Pharma or MOTS-c 10mg by Peptide Hubs to check results across makers. If you need a third source, we also carry MOTS-c 10mg by Axiolabs. All of them sit on our Peptides and SARMS page.

Common Questions About MOTS-c 10mg

Is MOTS-c the same as a mitochondrial peptide?
Yes. Mitochondrial Peptide is simply the descriptive name for MOTS-c on product pages.

Do I need a prescription?
No. You can buy MOTS-c 10mg without prescription from our shop.

How many amino acids does MOTS-c have?
It is a short chain of 16 amino acids, which is why it counts as a peptide rather than a protein.

Buy MOTS-c 10mg Online

Add MOTS-c 10mg to your cart to order the British Dragon vial. If you want to compare makers side by side in one study, pick up a second vial from Dragon Pharma or Peptide Hubs, or browse the Peptides and SARMS category for more metabolic options.

Level	Amount	How often	Length	Notes
Research ranges
Cautious start	2.5 mg	1–2 times a week	4–6 weeks	Conservative starting point, under supervision
Moderate, intermittent	5 mg	2–3 times a week	4–8 weeks	Range discussed most often
Higher frequency	5 mg	3–5 times a week	4–12 weeks	Used for metabolic support or training blocks
10 mg dose	10 mg	1–3 times a week	4–8 weeks	"10 mg" may refer to what's in the vial, not the amount per dose
Key facts
Approval status	A peptide made in the mitochondria; there is no FDA-approved dose or clinical protocol
Usual route	Injection under the skin (subcutaneous)
Sports testing	USADA lists MOTS-c as an experimental drug, so no therapeutic use exemption is possible; the WADA 2026 Prohibited List applies from January 1, 2026
Possible side effects	Reactions at the injection spot, changes in energy, poor sleep, swings in blood sugar
Do not use if	Pregnant, breastfeeding, with a history of cancer, with organ impairment, or a tested athlete
Combining with other products	Using it together with GLP-1 drugs, stimulants, thyroid medication, or other peptides makes side effects harder to trace
Disclaimer	Figures are math conversions only; they do not confirm product quality, safety, or medical suitability

Reconstitution calculator
Find out how much bacteriostatic water to add and how many units to draw on your syringe for your MOTS-c dose.
Peptide in the vial	mg
Bacteriostatic water	mL
Dose you want	mg
Syringe

Results
Choose your values and press Calculate.
Concentration	—
Amount to draw	—
Units to draw	—
Doses in the vial	—
How the math works
1. Find the concentration	Divide the peptide in the vial by the water added. For example, 10 mg ÷ 2 mL = 5 mg/mL
2. Work out the volume	Divide the dose by the concentration. For example, 5 mg ÷ 5 mg/mL = 1 mL
3. Convert to units	On a U-100 syringe, multiply the mL by 100. For example, 1 mL = 100 units
4. Check the syringe	Make sure the amount fits the syringe you are using
Worked example
Vial	10 mg MOTS-c
Water	2 mL bacteriostatic water
Dose	5 mg
Syringe	100 units (1 mL)
Concentration	10 mg ÷ 2 mL = 5 mg/mL
Amount to draw	5 mg ÷ 5 mg/mL = 1 mL, which is 100 units on a U-100 syringe
Doses in the vial	10 mg ÷ 5 mg = 2 doses
Vial size vs dose
A vial marked "10 mg" holds 10 mg in total before it is mixed. It is not a single dose, and it does not mean you use the whole vial. The amount per dose depends on how much water you add and what your clinician prescribes. For example, 10 mg mixed with 2 mL gives 5 mg/mL, so a 2.5 mg dose is 0.5 mL, which is 50 units on a U-100 syringe.
Disclaimer
This tool does math conversions only. It does not choose a dose for you or confirm product quality, safety, or medical suitability.

Reconstitution & Storage

Mixing a peptide takes about a minute. Keeping it good afterwards is the part most people get wrong, so follow the guide below and then store the vial the way we describe underneath it.

Step by step guide to reconstituting a peptide vial: bring vial and diluent to room temperature, draw the diluent, inject slowly down the inner wall, swirl gently, never shake

How to Reconstitute

Follow the five steps in the guide above. Bring the vial and the diluent to room temperature first, add the bacteriostatic water slowly down the inside wall so it does not foam and swirl gently until the powder is fully dissolved. Never shake the vial and never spray the bacteriostatic water straight onto the powder.

How to Store the Mixed Peptide

Once it is mixed, the vial goes back in the refrigerator at 2 to 8°C (35.6°F to 46.4°F) and stays there until you have used it. Write the mixing date on the vial so the clock is visible, not remembered.

Temperature: a normal fridge, 2 to 8°C (35.6°F to 46.4°F). Not the freezer, not a kitchen cupboard.
Shelf life: about 4 weeks. Past 28 days, discard it.
Light: keep it in the box or a dark drawer. Direct light degrades peptides.
Handling: swab the stopper before each draw, use a fresh needle and never shake the vial. Swirl gently if it needs mixing.
Freezing: do not freeze a mixed solution. Ice crystals and freeze-thaw cycles cut potency.
Dispose if: the liquid turns cloudy, changes colour, or shows visible particles.

Unmixed powder is far easier to store. Keep it dry, out of light, at room temperature for short periods or at -20°C for the long term and reconstitute only what you plan to use.

No reviews found

Please log in to write MOTS-c 10mg review.

Related Offers

Axiolabs

MOTS-c 10mg

Manufacturer: Axiolabs
Pharmaceutical name: MOTS-c; Mitochondrial Peptide
Pack: vial (10 mg per vial)
⚠️ Provided in a lyophilized powder for stability

Kalpa Pharmaceuticals LTD, India

MOTS-c 10mg

Manufacturer: Kalpa Pharmaceuticals
Pharmaceutical name: MOTS-c; Mitochondrial Peptide
Pack: vial (10 mg per vial)
⚠️ Provided in a lyophilized powder for stability

Domestic & International

Dragon Pharma, Europe

Cut Mix 150

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Testosterone Propionate,
Drostanolone Propionate, Trenbolone Acetate
Pack: 10 ml vial (150 mg/ml)

$72.00