Klow Klow
Peptides and SARMS
Klow

Manufacturer: Dragon Pharma
Pharmaceutical name: BPC 157 10mg + TB 500 10mg + KPV 10mg + GHK-Cu 50mg MIX
Pack: vial (80mg)
⚠️ Provided in a lyophilized powder for stability

$120.00 $200.00
Shipping :
International
You will save $80.00

Dragon Pharma KLOW - Advanced Healing Peptide Blend (BPC-157 + TB-500 + KPV + GHK-Cu)

KLOW is Dragon Pharma's next-gen recovery stack in a single vial: BPC-157 (10 mg) + TB-500 (10 mg) + KPV (10 mg) + GHK-Cu (50 mg) - a total of 80 mg lyophilized powder designed for athletes who need rapid soft-tissue support, calmer inflammation, and smarter remodeling between hard sessions. Instead of buying four peptides and juggling vials, KLOW unifies the most proven repair agents into one structured formula that's friendly for on-the-go protocols and deload phases.

What KLOW aims to do for lifters: BPC-157 is popular for GI lining and tendon/ligament comfort; TB-500 (a TB4 fragment) is used for tissue repair dynamics and mobility; KPV (alpha-MSH fragment) is appreciated for anti-inflammatory calm and skin/IBD-adjacent comfort; and GHK-Cu is loved by longevity enthusiasts for collagen support, healthy skin turnover, and "feel-better" recovery texture. Put together, the blend is engineered to help you train again sooner, reduce "nagging twinges," and build durable work capacity across a mesocycle. Use it when: mileage is climbing, elbows/knees feel cranky, a minor strain needs help, or prep volume is over the red line.

Why KLOW vs. DIY Stacks

  • All-in-one convenience: Four high-value peptides in one vial = one reconstitution, one protocol, zero juggling.
  • Coverage across tissues: BPC-157 + TB-500 for tendon/ligament/fascia; GHK-Cu for collagen/skin; KPV for inflammation tone.
  • Prep & deload friendly: Smooths the rough edges of high-volume blocks and bridges intensity weeks without losing progress.
  • Practical for travel: One vial in the cooler, one set of pins, less room for error.

Format & Reconstitution (Read First)

Form: KLOW is a lyophilized powder (no BAC water included). Users typically reconstitute with bacteriostatic water sourced separately. Because vial total is 80 mg, choose a volume that gives you easy math per dose:

  • Example A (4.0 ml BAC water): 80 mg / 4.0 ml = 20 mg/ml.
  • Example B (3.2 ml BAC water): 80 mg / 3.2 ml = 25 mg/ml (every 0.1 ml = 2.5 mg).
  • Example C (2.0 ml BAC water): 80 mg / 2.0 ml = 40 mg/ml (more concentrated; smaller injections).

General reconstitution steps: clean stopper, vent carefully, add BAC water slowly down the glass, swirl gently (don't shake hard), refrigerate after mixing (2–8 °C). Use sterile technique. This is informational guidance only-follow your local standards and clinician direction.

How Lifters Commonly Structure KLOW

Because KLOW contains four actives, many athletes dose by total mg of blend and let each component scale with it. Practical user patterns (subQ):

  • Foundation (recomp/maintenance): 2–5 mg of KLOW per day or EOD for 4–6 weeks.
  • Focused repair block: 5–10 mg of KLOW daily for 2–4 weeks, then taper to EOD as symptoms settle.
  • Localized approach: Some users pin subQ near a problem area (e.g., medial elbow/shoulder skinfold) for perceived local support.

Pro tip: Pair with sleep hygiene, soft-tissue work, sled dragging/tempo work, and a steady protein target (≥ 1.6–2.2 g/kg). Recovery inputs "stack."

Single Peptides It Replaces

  • BPC-157 (single): Tendon/gut support classic - BPC-157
  • TB-500 (single): Tissue remodeling favorite - TB-500

How Each Component Contributes

  • BPC-157 (10 mg): Users reach for it during elbow/shoulder/knee irritations, or GI stress from hard dieting.
  • TB-500 (10 mg): Common in repair blocks to support range and ease movement quality during high mileage.
  • KPV (10 mg): Valued for an "anti-inflammatory calm," skin support, and comfort during flares.
  • GHK-Cu (50 mg): Collagen/skin turnover vibe; athletes like the "recovered" look/feel in longer cycles.

Comparison Chart - KLOW vs TB-500 Solo (UGL)

Feature KLOW (BPC+TB-500+KPV+GHK-Cu) TB-500 (Solo, UGL)
Coverage Multi-tissue recovery + inflammation + collagen/skin Mainly soft-tissue/tendon mobility
Convenience One vial, one protocol Single agent; may need add-ons
Inflammation Tone Includes KPV for calm Indirect
Collagen/Skin Includes GHK-Cu (50 mg) Limited
Best Use Case Broad recovery blocks, high training volume Narrow tendon/ligament focus

Coach's Notes (Maximize the Blend)

  • Rotate stressors: If something hurts, scale it back; load the pattern you can recover from.
  • Move blood: Sleds, cycling, easy rows - circulation matters for peptide "feel."
  • Fuel the tissue: Don't skimp on collagen sources, vitamin C, and baseline protein.
  • Sleep is king: The blend lands best when sleep is actually restorative.

Safety & Practical Considerations

  • For research/informational use: Follow local regulations and consult a qualified clinician.
  • Use sterile technique for reconstitution and injections; refrigerate after mixing.
  • Discontinue and seek medical advice if unexpected reactions occur.

Frequently Asked Questions

What makes KLOW better than buying single peptides?

It's convenience and coverage: one vial gives tendon/ligament support (BPC/TB-500), inflammation tone (KPV), and collagen/skin support (GHK-Cu) in a unified plan.

How much BAC water should I add if none is included?

Many users choose 3.2–4.0 ml for easy math. Example: 4.0 ml yields 20 mg/ml; 0.25 ml then equals 5 mg of the blend. Store refrigerated after reconstitution.

Can I still add single BPC-157 or TB-500?

Yes, some athletes add a short TB-500 or BPC pulse for "front-end" support, then let KLOW maintain. See single options above.

How long until I notice a difference?

Many report comfort or movement-quality improvements within 1–3 weeks when training and sleep are aligned. Collagen/skin benefits build over cycles.

Is localized subQ near the issue worth it?

Some users prefer subQ near a problem area for perceived local benefit, though systemic support is also common. Keep technique sterile and consistent.

Phase How often Length Route Best suited for
Common protocol ranges
Loading phase 4–5 times a week, or daily 8–12 weeks SubQ Recovering from an active injury or surgery
Maintenance 2–3 times a week Ongoing SubQ Collagen support and a steady anti-inflammatory base
Lowered dose 2–3 times a week at half dose Reassess after 2 weeks SubQ Managing water retention (edema)
Equivalent doses with separate vials
Compound Dose How often
BPC-157 250–500 mcg Daily or 5 times a week
TB-500 2.5 mg Twice a week
GHK-Cu 1–2 mg Daily or 5 times a week
Key facts
What it is A single vial that combines BPC-157, TB-500, and GHK-Cu
Mixing Usually 2 mL of bacteriostatic water per vial
Storage Keep in the fridge after mixing and use within 4–6 weeks
Most common side effect Water retention (edema), mainly caused by the TB-500
If edema appears Cut the dose in half and reassess after 2 weeks
Separate vials BPC-157 and GHK-Cu can be drawn into the same syringe
Disclaimer Figures are math conversions only; they do not confirm product quality, safety, or medical suitability
Reconstitution calculator
Find out how much bacteriostatic water to add and how many units to draw on your syringe for your Klow blend dose.
Peptide in the vial
mg
Bacteriostatic water
mL
Dose you want
mg
Syringe
Results
Choose your values and press Calculate.
Concentration —
Amount to draw —
Units to draw —
Doses in the vial —
How the math works
1. Find the concentration Divide the peptide in the vial by the water added. For example, 10 mg ÷ 2 mL = 5 mg/mL
2. Work out the volume Divide the dose by the concentration. For example, 2 mg ÷ 5 mg/mL = 0.4 mL
3. Convert to units On a U-100 syringe, multiply the mL by 100. For example, 0.4 mL = 40 units
4. Check the syringe Make sure the amount fits the syringe you are using
Worked example
Vial 10 mg Klow blend
Water 2 mL bacteriostatic water
Dose 2 mg
Syringe 100 units (1 mL)
Concentration 10 mg ÷ 2 mL = 5 mg/mL
Amount to draw 2 mg ÷ 5 mg/mL = 0.4 mL, which is 40 units on a U-100 syringe
Disclaimer
This tool does math conversions only. It does not choose a dose for you or confirm product quality, safety, or medical suitability.

Reconstitution & Storage

Mixing a peptide takes about a minute. Keeping it good afterwards is the part most people get wrong, so follow the guide below and then store the vial the way we describe underneath it.

Step by step guide to reconstituting a peptide vial: bring vial and diluent to room temperature, draw the diluent, inject slowly down the inner wall, swirl gently, never shake

How to Reconstitute

Follow the five steps in the guide above. Bring the vial and the diluent to room temperature first, add the bacteriostatic water slowly down the inside wall so it does not foam and swirl gently until the powder is fully dissolved. Never shake the vial and never spray the bacteriostatic water straight onto the powder.

How to Store the Mixed Peptide

Once it is mixed, the vial goes back in the refrigerator at 2 to 8°C (35.6°F to 46.4°F) and stays there until you have used it. Write the mixing date on the vial so the clock is visible, not remembered.

  • Temperature: a normal fridge, 2 to 8°C (35.6°F to 46.4°F). Not the freezer, not a kitchen cupboard.
  • Shelf life: about 4 weeks. Past 28 days, discard it.
  • Light: keep it in the box or a dark drawer. Direct light degrades peptides.
  • Handling: swab the stopper before each draw, use a fresh needle and never shake the vial. Swirl gently if it needs mixing.
  • Freezing: do not freeze a mixed solution. Ice crystals and freeze-thaw cycles cut potency.
  • Dispose if: the liquid turns cloudy, changes colour, or shows visible particles.

Unmixed powder is far easier to store. Keep it dry, out of light, at room temperature for short periods or at -20°C for the long term and reconstitute only what you plan to use.

No reviews found

Please log in to write Klow review.

Related Offers
Domestic & International
Cut Mix 150
Dragon Pharma, Europe

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Testosterone Propionate,
Drostanolone Propionate, Trenbolone Acetate
Pack: 10 ml vial (150 mg/ml)

$72.00
Domestic & International
Deca 300
Dragon Pharma, Europe

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Nandrolone Decanoate
Pack: 10 ml vial (300 mg/ml)

$66.00
Domestic & International
Buy 5+ for $62.70 and save $16.50
EQ 300
Dragon Pharma, Europe

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Boldenone Undecylenate
Pack: 10 ml vial (300 mg/ml)

$66.00
Buy 5+ for $62.70 and save $16.50
Shipped USA Domestic
Masteron 100
Dragon Pharma, Europe

Manufacturer: Dragon Pharma
Pharmaceutical name: Drostanolone Di-Propionate
Pack: 10 ml vial (100 mg/ml)

$142.00
Domestic & International
Masteron 200
Dragon Pharma, Europe

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Drostanolone Enanthate
Pack: 10 ml vial (200 mg/ml)

$125.00
Domestic & International
Buy 5+ for $43.70 and save $11.50
NPP 150
Dragon Pharma, Europe

Manufacturer: Dragon Pharma, Europe
Pharmaceutical name: Nandrolone Phenylpropionate
Pack: 10 ml vial (150 mg/ml)

$46.00
Buy 5+ for $43.70 and save $11.50
Domestic & International
Parabolan 100
Dragon Pharma, Europe

Manufacturer: Dragon Pharma
Pharmaceutical name: Trenbolone Hexahydrobenzylcarbonate
Pack: 10 ml vial (100 mg/ml)

$99.00
Shipped USA Domestic
Primobolan 100
Dragon Pharma, Europe

Manufacturer: Dragon Pharma
Pharmaceutical name: Methenolone Enanthate
Pack: 10 ml vial (100 mg/ml)

$279.00

Add to Cart - Product(s)

Close Button
Empty

Total Cost: